[Moon] QRT at 70/23 cm on EME contest

[Per Sjolander]

Hello,

There can be big or small problems causing trouble for a moonbouncer.....

I have now a very small detail causing me QRT for the moment and that's just 
a tiny gear-wheel in the rotator.

I'm using two AC-motor drives in an old Daiwa and the absolute primary drive 
at one of the motor axis has broke in two pieces. And just one drive-unit is 
not enough. Have tried to glue the plastic cog-wheel together but no 
success.

I understand this weekend is gone but if anyone has this piece in the 
junk-box I would be very glad.



mny 73 to all

SM3JQU /Per



----- Original Message ----- 
From: "Viggo Magnus LA9NEA" <la9nea at online.no>
To: <moon-net at list-serv.davidv.net>
Cc: "Moon" <Moon at moonbounce.info>
Sent: Thursday, October 08, 2009 10:07 PM
Subject: [Moon-net] 23 cm EME contest


> Hello
>
> I will be qrv this weekend during the first leg of the ARRL 23 cm EME 
> contest. Glad to  see some of the 3 meter and smaller 23 cm  EME stations 
> will be qrv, and for sure I will look for you
> Planned start for me will be saturday at 0300z
>
> GL to all
>
> 73 Viggo  LA9NEA
>
> LA9NEA 23 cm EME set up:
> Icom 756 pro II / SDR IQ
> TR1296H trv Kuhne
> 6 x 7289 ring PA ,400 watt
> 5.2 meter dish,
> VE4MA Feed
> 1.stage preamp.Cavity NE32484 0.28 dB
> 2.stage Kuhne  MGF 4953A 0.4 dB
> JO59dx
> Autotracking by W2DRZ,
> _______________________________________________
> Moon-Net posting and subscription instructions are at 
> http://www.nlsa.com/nets/moon-net-help.html
>