[Moon] switching HV

[peter blair]

Ive done the same as Peter describes for decades, the 144, 432 tropo and 6m 
PAs all hang on the same HT line, but as everyone emphasises, keep zee 
figers out and I also check with the shorting stick which always hangs on 
the front of my racks.
 HNY to all
 Peter G3LTF
----- Original Message ----- 
From: "Peter Sundberg" <sm2cew at telia.com>
To: "Lars Pettersson" <sm4ive at telia.com>; <moon at moonbounce.info>
Sent: Sunday, December 30, 2007 11:03 AM
Subject: Re: [Moon] switching HV


> Just connect the HV supply to all amps, no need to switch. The HV won't 
> damage
> a tube that has no heater or grid voltages switched on.
>
> Be careful, keep fingers out of "cold" amps..
>
> 73 de Peter SM2CEW
> www.sm2cew.com
> http://blog.sm2cew.com
>
>
>
>
> At 10:48 2007-12-30 , Lars Pettersson wrote:
>>
>> I`m looking for some information of a safe way to switch the High voltage
>> between Amp`s.
>> My Voltage = 5Kv DC
>> I do have some BIG 3 phase switches but im not sure about the isolation, 
>> so
>> if somone have some good solutions it would be nice.  Cold or Warm
> switching!
>>
>> And a HAPPY New Year.
>> With lots of CW EME
>>
>> 73 de Lars SM4IVE
>>
>> _______________________________________________
>> Moon mailing list
>> Moon at moonbounce.info
>> http://www.moonbounce.info/mailman/listinfo/moon
>>
>> Please enter/update your standings:
>> http://www.vhf-dx.net/top.html
>>
>> When you decide to remain anonymous I may consider this unpolite and 
>> remove
>> you from the list
>
>
>
>
>
>
> _______________________________________________
> Moon mailing list
> Moon at moonbounce.info
> http://www.moonbounce.info/mailman/listinfo/moon
>
> Please enter/update your standings:
> http://www.vhf-dx.net/top.html
>
> When you decide to remain anonymous I may consider this unpolite and 
> remove you from the list
>